How to Get Water Out of iPhone Charging Port
How to Get Water Out of iPhone Charging Port: The Ultimate Guide
If your iPhone has been wet, don’t panic! There are a few ways to get the water out of the charging port and have your phone up and running again in no time. In this guide, we will walk you through the most effective methods for removing water from an iPhone’s charging port. We’ll also discuss some preventative measures that can help keep your phone dry in case of accidental spills. So read on and follow our easy steps to get water out of iPhone charging port!
List of Preventive Measures to be followed
The best way to prevent having deal with getting water out of iPhone charging port is to take some preventative measures. One of the easiest ways to do this is by using a water-resistant case. These cases are designed to keep your phone dry in case of accidental spills or drops into water. If you don’t have a water-resistant case, be sure to keep your phone away from liquids as much as possible.
Another way to help protect your phone from getting wet is by making sure the charging port is well sealed. To do this, use a toothpick or bamboo skewer to clean out any debris that may be blocking the seal around the port. You can also try applying a small amount of Vaseline or lip balm around the edge of the port – this will create a moisture-resistant barrier.
Also Read : How to Change Your Birthday on TikTok
Different Methods to get Water out of iPhone Charging Port
The best way to get water out of iPhone charging port is by using a vacuum cleaner. If you have a vacuum cleaner handy, this is the quickest and easiest solution. Simply attach the vacuum cleaner nozzle to the charging port. Turn on the vacuum cleaner and hold it in place for about 15 seconds. The suction will help pull any remaining water out of the port.
If you don’t have a vacuum cleaner, you can try using a hair dryer instead. Again aim the hairdryer at the charging port. Set the hairdryer to its highest heat setting and hold it in place for about 15 seconds. The heat will help evaporate any remaining water from the port.
If neither of these methods work, you may need to take more drastic measures in order to get water out of iPhone charging port. One option is shaking your phone vigorously for about 30 seconds (be careful not too shake it so hard that you break your screen!). Another solution would be turning on all four corners of your phone at once and holding them there until no more liquid comes dripping out from underneath any one corner’s edge – this should cause enough pressure inside that chamber where the wires meet up with their corresponding ports so as to push most if not all remaining moisture back into its proper storage container!
Lastly, if your phone has been wet, be sure to dry it off completely before trying to charge it. You can use a paper towel or a hair dryer on its lowest heat setting to do this. Once your phone is dry, you can try plugging in the charger and see if it will turn on. If it doesn’t, you may need to take it to a technician for further assistance.
We hope this guide was helpful in showing you how to get water out of iPhone charging port! Be sure to follow our tips for preventing future accidents and your phone should stay safe and dry. Thanks for reading!
